In many cases, one of the major problems you face when you are using the electric chainsaw for wood or a tree cutting is a tangled saw chain. This can be extremely frustrating, not to mention the fact that a tangled saw chain will hinder your ability to cut accurately.
Untangle the chainsaw chain is not difficult, but it is something that a lot of people don’t know how to do. However, some people have even taken the time to create step by step guides on how to untangle the chainsaw chain in order to help other people learn how to do it.
Table of Contents
Take These Precautions Before Untangling the Chainsaw:
You should follow some precautions in order to maintain your safety when untangling a chain, whether it is a new one or an old one.
To untangle your chainsaw chain safely, here are the safety accessories you must have.
1. Protective Goggles
To prevent possible cuts from the chain, protective goggles are attached to the tips of your fingers. This is one of the most important things you must have while untangling chainsaws.
Protective goggles can help prevent cuts when you are working with sharp chains or saws. These types of goggles can protect your eyes and other parts of your face from harm because they restrict dust and debris which is highly prone to fly in the air. welding helmet also provide adequate protection for you as these covers your head.
2. Gloves
Gloves, whether they are full or finger-less, should be worn while doing any type of work with chain saws. Safety gloves are highly recommended because they protect your hands while allowing you to handle the chainsaw freely. Gloves also provide great grip when using a chainsaw so you can easily use it.
However, some people choose to use full gloves and others use fingerless gloves. However, no matter what kind of gloves you wear, make sure that they have a thick layer of leather in order to provide protective cover.
Related: How To Use A Circular Saw
Also, make sure that they are long enough so that they cover you from the top of your wrist to your fingers.
Tools & Equipment to be Used:
When you are untangling a chainsaw, you will need a number of tools and equipment. When you are looking for the best chainsaw chain tool, make sure that you get the right one for your needs. The below-mentioned tools will help you to untangle your chainsaw safely and effectively.
1. Liquid lubricating oil
The oil is used to lubricate the chainsaw’s moving parts. This will allow you to untangle the chainsaw chain easily. Be sure that you drip a little amount of oil along the length of your chain so that it will be well-oiled while loosening the tangle.
2. Strong Table
Your chainsaw is going to act as your primary cutting tool. Hence, you should be able to safely operate it and keep others away from danger in case of an accident. To do so, you should have the right tools and equipment on hand.
To help you in this regard, you must have at least a table that is strong enough to withstand the weight of your chainsaw. If you have a small table or one that is not completely sturdy, it will most likely break down and throw your chaining saw off balance. You will need a bigger table for this to work properly.
3. Tools
As you prepare your chainsaw for use, you might have some additional tools that are required to be used. This can be ensured by using the right tools
like that screwdriver or an Allen wrench. You will need a screwdriver because you might have to tighten a few screws during the process of untangling it.
You will also require an Allen wrench to work on the nuts or bolts but this is optional.
Also Read: The 8 Best Circular Saw Review | How to Pick Right!
Another tool that you might find handy when untangling your chainsaw is a piece of wood. This kind of wood can be used as a base for your chainsaw and it can also be used as a barrier so that no one gets hurt in case your chainsaw movements are uncoordinated.
Untangling the Chainsaw Chain: 5 Easy Ways
Sometimes, things get tangled up in your chainsaw. A misplaced foot or a fallen branch can bring you to a halt and leave you feeling frustrated. Luckily, there are many ways to untangle the chainsaw chain. Here are 5 of the simplest ways that we’ve found:
1. Get The Chain Prepared
Your chainsaw is old or new is not factoring here. It is the condition of your chain that matters. If you are using an old, worn out chain then it would be better if you replace it with a new one. This method will not help a good chainsaw chain. So, to be on the safer side it is better to use a sharp and new chainsaw chain so that there won’t be any problems while handling your chainsaw in the near future.
2. Lightly Brush A Chain Against A Tree
This is not for your chainsaw but for a piece of wood that you are going to use as an anvil. You can use anything, from a branch to a rock to a fence post. You must put the chainsaw in the vertical position and aim towards the ground where you want the chain to rest. Put it on the anvil and pull hard at it. This will straighten the chain very easily.
3. Use A Hammer And A Flat-Head Screwdriver
Use your screwdriver to hit the chain against the rock or wooden anvil as shown in above picture. If you are using a rock then make sure that it is heavy enough to not be shaken apart. Do this on the side that is furthest away from the blade. If you are using the wooden anvil, hold onto the handle of your chainsaw with one hand while hitting the chain with the other. The hammering motion should be done slightly fast.
4. Use A Metal Ruler And Screwdriver
Hold the chain’s blade by both ends and place the metal ruler on top of it. Then, you are free to use your screwdriver to pry off the links from the blade. Make sure that the edges of your metal ruler are sharp so that they would not get broken or bent in doing this exercise.
5. Give The Chain A Firm Tug
Pull straight out from the middle of the blades and remove it from the shrub or tree that you are using for anvil. Use your fingers to grab each of the links on either sides of your chainsaw and pull again from both ends. Continue pulling in this manner until all the links are out of the chain. Do this with each side as well as in reverse order.
Related: Best Table Saw Blade For Sharp Cuts (Top Rated Picks)
If you are unable to get your chainsaw chain out of tangles then all these methods would be of no use. There is a risk of damaging the saw with too much force. So, always make sure that you don’t put too much pressure when untangling your chainsaw chain.
Conclusion
There are many different tips and tricks available for untangling chainsaw chains and each one can work for your condition. You must pick the method that works best for you and your chainsaw. Hopefully, these tips will make it less painful for you to untangle the chainsaw chain that is otherwise just impossible to untangle.