All carpenters will unanimously agree that a quality miter saw stand is an indispensable tool for them, and hence irreplaceable. It does not need to be emphasized that no workshop can do without the miter saw. At the same time, it is worth noting that if a carpenter chooses an improper or faulty stand, he’ll not be able to use the miter saw effectively.
For making the most of a miter saw, you’ll need to install it properly on a compatible stand with a perfectly flat base. Additionally, the stand’s frame should be robust so that you can secure planks and wooden boards to it for completing your projects. Moreover, the best miter saw stands should be easy to assemble, dismantle, and move as well as amenable to height adjustments.
Put, the best miter stands should offer a good deal of support and stability so that you can use the miter saw to good effect. Depending on the type of woodwork projects that you normally work on, you’ll come across very large models and also portable ones. The portable models are ideal for working on small projects and easy to fold and carry.
On the other hand, the bigger models come in perfectly when you have to complete large projects and tend to be very heavy and durable. In this guide, we will review six of the best miter stands in detail, preceded by a value section listing the considerations for choosing a quality product.
Best Miter Saw Stand: Buying Guide
A miter saw stand has some unique features that differentiate and distinguishes it from other types of stands. Following are some of the most common features and functionalities of a miter stand that’ll help you to choose the one you need:
1. Versatility or compatibility
You’d want to opt for a miter stand that’ll accommodate a wide range of products. If you choose a stand that is compliant with just a limited number of miter saws, you’ll be able to work only on a few types of projects. However, the models reviewed below will enable you to work with a sweeping range of miter saws
2. Stationary or wheeled (rolling)
The heavyweight miter stands tend to be stationary obviously because they weigh a lot, and so you cannot move them easily. However, many heavy models come with built-in wheels, which allow you to move them between projects in a specific site. The wheels are either made of rubber or could be pneumatic.
You’d have to inflate the pneumatic wheels for making the standing roll effortlessly on any terrain.
3. Capacity for supporting materials
When we talk about a miter stand’s capacity, we generally mean the maximum length of material (planks) it can support. Miter saw stands have support (for holding the materials or planks) that vary in length from one model to another. The length of the support, together with the load-bearing capability of the miter stand, determines whether the product will be good for smaller projects only or capable of handling large projects as well.
4. Portability
Portable models allow you to move the stands easily even after you have installed the saw. It does not bear mention that the weight of the miter saw adds to the heft of the stand. That said, you’ll select a portable stand if your work entails constantly moving from one site to another.
Related Article: Top 10 Best Electric Chainsaw Review
Alternatively, if you work every day at the same job site, then choosing a heavy model will be par for the course.
5. Dimensions
Whether a particular miter stand is portable or not also depends upon its dimensions. Naturally, the bulkier models also tend to be longer compared to the lightweight ones. On the one hand, you can work with long materials on heavier models, but transporting them could be an issue on the other.
6. Maximum weight support
Always check the maximum weight that a miter stand can support or hold. The majority of models can support weights of up to 300 pounds. However, some models can even support weights of up to 500 pounds.
7. Warranty
Warranty is one of the most significant considerations that you should keep in mind while comparing and contrasting different models. After all, you’ll be investing a substantial amount, and therefore you’d want to product to stay functional as long as possible.
Reviewing the Best Miter Saw Stands
Now that we’ve gone through the factors you need to consider while choosing a miter saw stand, let’s have a closer look at the best models you can buy online. To make the process of selecting a quality stand easier for you, we’ve come up with our Top 6 list of the best miter saw stands.
1. Best Stable Miter Saw Stand: DEWALT DWX725B Miter Saw Stand
The miter saw the line from Dewalt enjoy a high level of demand, and therefore highly sought after like the DWX725B. The Dewalt DWX725B is a premium quality miter stand that scores high on performance and durability. This miter stand is one of the most performance-oriented models as it can support weights of up to 1000lbs.
Hence you can make good use of the DWX725B for working on and complete large-scale and across-the-board projects. Although the product has been designed for heavy-duty woodwork projects, it is surprisingly lightweight by its standards. The miter stand comes with a frame constructed out of aluminum and weighs 15.4 pounds making it supremely portable.
Therefore, you can use the product at different job sites. The DWX725B comes with robust and hardwearing legs that furnish steady support. The legs also fold easily when you want to store the stand conveniently. Transport latches or fasteners facilitate easy transportations of stands in pairs.
What We Like It
- Can withstand weights of up to 1000 pounds
- Leg lock levers enable easy and quick installation
- Transport latch enables transportation of stands in pairs
- Lightweight construction: the miter stand weighs only 15.4lbs
- Constructed out of a durable industrial-grade of aluminum
- Can be used with a wide range of miter saws
- Capable of handling both simple and big-time projects
- The manufacturer is offering a 3-year warranty on the product
- Offers a high level of stability
- Doubles up as a tool stand
- Mounting brackets included in the package
What We Don’t Like It
- The model is a tad for light or small projects
- The carry handle can be difficult to access when the legs stay folded
- The mounting holes’ diameter is not appropriate for installing brackets
2. Super Quick & Easy to Setup: Bosch Portable Gravity-Rise Wheeled Miter Saw Stand
Bosch workbenches are renowned for the stability they offer with projects as well as for their heavy-duty performance. Take the Bosch Portable Gravity-Rise Wheeled Miter Saw Stand T4B, for instance. The stand’s integrated support can hold materials having a length of 18ft.
On the other hand, its proprietary universal mounting mechanism makes it compatible with all types of miter saws. The adaptable telescoping leveling legs furnish sound stability on almost types of surfaces, especially uneven ones. The built-in rubber wheels enable you to move the stand from one Jobsite to another with remarkable ease. You can also easily adjust the extent of the outfeed- a feature that comes handy when working with materials of different lengths.
The Bosch Portable Gravity-Rise stand, in sharp contrast to other models belonging to its category, facilitates easy setup and disassembling in no time. You need to turn the release handle for raising or lowering the stand as per your convenience. This miter stand is incredibly durable and resilient as its frame has been constructed out of aluminum and heavy-gauge steel.
What We Like It
- Despite weighing 33 pounds, the stand can support weights of up to 200 pounds
- Comes with integrated rubber wheels for easy transport across job sites
- The tabletop support can hold materials up to a length of 18ft
- Broadened leg base improves stability, and thereby safety
- Quick-release levers and handles can be used effortlessly
- The legs can be folded down quickly for swift transportation from one site to another
- The hardwearing kickstand ensures steady balance, especially when the miter saw is tethered
- The ergonomic design of the stand makes sure that the retractable and insulated levers enable hassle-free transportation
- Rubberized feet check to slide and slipping
What We Don’t Like It
- The clamp for locking the stand upright has a metallic part could keep the table from locking
- The contact area of the leveling feet pads could have been a tad bigger
- The stand is a bit too heavy
3. Best Portable Table Saw Stand: Dewalt DW7440RS Table Saw Stand
The Dewalt DW7440RS is a versatile piece of miter stand that is reinforced with the Site-Pro modular guarding system. This unique system allows you to use a variety of miter saws, thus allowing you to complete a comprehensive range of projects. The Site-Pro modular guarding system lets you mount different miter saws for quickly and accurately cutting a variety of planks and boards.
The DW745 comes equipped with a 10-inch 24-tooth carbide blade, a push stick, a miter gauge, and blade guards, letting you start your project. The 15 amps motor transfers ample power to the saw, ultimately enabling you to accomplish demanding jobs such as chipping pressure-treated lumbers and hardwoods. The 10-inch blade spins with a speed of 3,850 rpm, which ensures clean cuts, irrespective of the material.
The fencing configuration of the blade allows it to cut wooden blocks having a diameter of 20 inches. This miter stand can be easily set up on any surface, and its tabletop has a quality coating that minimizes the friction that improves the quality of cuts. The metallic rolling cage helps in a stable set up and enhances balance across-the-board.
What We Like It
- This Dewalt miter stand has an amazingly lightweight design and construction, weighing just 33lbs
- The quick connecting and flexible stand brackets tethers to the miter saw effortlessly; also detaches easily from stand thereby facilitating unloading and loading
- The hardwearing kickstand enables the stand to stay upright and erect, thus helping in storage and transportation
- The hardwearing kickstand enables the stand to stay upright and erect, thus helping in storage and transportation
- The broadened stand base together with the counteracting hind legs furnishes steady balance for monitoring material feed
- Heavy-duty 15 amps motor makes the 10-inch blade gyrate at a speed of 3850 rpm, resulting in clean-cuts across-the-board
- The telescoping structure of the rack and pinion fence rails open up fully to slice through thickest of materials
- The modular guard mechanism keeps fingers and hands safe and secure
What We Dont Like It
- The fasteners provided with the stand do not fully go through the holes in the miter saw’s tube
- Additionally, the fasteners are overly small making it difficult to install along with the lock washers and two flats
4. Best Sturdy & Tough Miter Saw Stand: Tough built 124” Miter Saw Stand Universal Tool Mount
The Toughbuilt 124” Miter Saw Stand with universal tool mount does not come cheap but offers more than it is worth. This Toughbuilt miter saw stand is an extremely robust product and is one of the sturdiest that you can buy. When you fully extend the miter stand, it is 124 inches long from one end to the other and 33-1/2 inches high.
So, you find it quite easy to saw through lengthy materials without any sag. This table saw weighs about 23.4lbs. You can easily move it from the workshop to your. This Toughbuilt miter stand comes with four extensible work supports two quick release and two work stops tool mounts that help in easily installing a variety of tools, including chop saws and miter saws.
The stand features built-in 8.5-inch thick rubber castors which come in handy for transporting the equipment to any job site quickly and safely. Additionally, the inbuilt support hooks enable safe and secure storing of materials. The 124” miter stand from Toughbuilt has been fabricated using top quality materials that make the product immensely durable and hardy.
The miter stand extendable up to a whopping 124” allows for the supporting of materials longer than 10 feet. On the other hand, the equipment’s height allows carpenters to cut through elongated material without any sag. The quick-release mounts permit effortless detachment of the saw for using it on an even base.
What We Like It
- The stand with universal tool mount allows you to use it with almost all types of miter saws
- Constructed out of tough and industrial-grade steel; guaranteed to last for years
- It comes with four material supports that allows extension up to 124.”
- Quick-release tool mounts let you detach the saw off of the stand and place it on a leveled platform
- The robust rubberized wheels help in rolling the stand over any terrain
- The leg locks release quickly, thereby helping in installing and taking down the stand with ease
- Support pegs facilitate simple and secure storage of materials
What We Dont Like It
- The manufacturer (Toughbuilt) has not mentioned the maximum weight support anywhere in the manual
- Assembly instructions listed in the manual are of no use
- The user will need a variety of tools for setting up the miter stand before using it
- The user would find it hard to move or turn around pieces owing to the rigidity and heaviness of this miter stand
5. Best Heavy Duty Folding Miter: BORA Portamate PM-4000
The BORA Portamante PM-4000 and your miter saw would make perfect soul-mates. This miter saw stand from Bora is not only supremely affordable but also incredibly performance-oriented. The product has been designed and constructed with a professional carpenter in mind.
This miter stand is not only compliant with almost any miter saw model or brand but can be installed anywhere you want to. Constructed out of the best grade of tubular steel, the miter stand is extremely hardwearing with a capacity for supporting weights up to 500 pounds. Hence the Portamante PM-4000 is perfectly ideal for large-scale and all-encompassing projects.
You can easily and safely fix and disengage your miter or chop saw, thanks to the quick attach/release mounts. The adaptable and flexible 13” material supports included with the stand can be adjusted for holding material having a length of at least 10 feet. However, the USP of this miter stand from BORA is that it retracts smoothly, making it easy to store and transport.
What We Like It
- Highly durable and resilient; chipped out of contractor grade, powder-coated steel
- Can withstand and support weights of up to 500 lbs
- Flexible snap-pin folding legs enables quick and smooth set up and dismantling
- Adjustable 13” material supports can hold lumber pieces up to 10 feet long
- Fast and easy fold-up, thus allowing hassle-free storage and transportation
- Quick attach mounts help install a comprehensive range of miter saws and chop saws
- Stays erect at a convenient work height (36”), enabling the user to work with accuracy without compromising safety
- Amenable to upgrading as per your convenience with the PM-4004 dual wheel upgrade kit
What We Dont Like It
- The paint wears thin; fastening the screws may cause scraping of the paintwork
- One of the supporting limbs does not connect with the main rail during storage
- The legs of the miter stand do not sit flat on the surface
- You may have to purchase the wheel kit separately if you want to make the most of this miter stand
The Different Types of Miter Saw Stands
Before we discuss the different factors that’ll influence your choice, let us review the different types of miter saw stands:
1. Traditional miter saw stands
The traditional miter saw stands as the naming denotes, serves as plain workbenches, and therefore, has simple designs. A basic miter stand has a wooden sawhorse on each side and a plank of wood wedged in between them. The traditional models tend to be extremely heavy, implying that they are incredibly robust and best used for large projects.
Also Read: The 5 Best Table Saw Blade For Sharp Cuts (Top Rated Picks)
Since the conventional models are bulky and weighty, once you install them, they stay put in the same position permanently.
2 . Tabletop stands
Tabletop stands have a thoroughly flat surface, thereby allowing you to mount your miter saw comfortably and firmly. The most conspicuous benefit of a tabletop stand is that it lets you mount miter saws of different sizes. Alternatively, this stand type’s biggest downside is that you’ve to attach the saw to the top, which could restrict mobility.
3 . Rail miter saw stands
Rail stands feature a straight rail that encloses four-leg stands that can be pulled out. You can place these stands almost anywhere you want to. Some rail miter stand models also come with extensions that enable you to extend their heights whenever you need to.
4 . Compound miter stands
Compound stands, by and large, have two planks, one wooden and the other metallic. A pair of horse-style legs support the planks. This type of miter saw stand could be either contemporary or traditional, and also happen to be sturdy and portable.
5 . Folding stands
You can easily set up as well as dismantle (or fold down) a folding stand, hence its name. Folding stands are designed in a manner that makes it easy for you to use them with a single hand. At the same time, since this type of stand is foldable, you can easily carry it from one place to another.
Frequently asked question (FAQ’s)
Selecting a brand saw stand is a daunting affair. There are a plethora of such stands from Carpenter, Craftsman. Each of these saw stands have their own set of features and performance metrics. Each has its own pros and cons too. Here are some frequently asked question that will help you understand your requirement better and enable you to take the right decision.
Should you get a miter saw stand?
There are many differing opinions among carpenters on whether it is better to use a miter saw stand or not. There are some professionals who feel that it is better to purchase a higher quality, more durable and more stable miter saw stand. Some others believe that unless one is a serious carpenter with a lot of work to do, it wouldn’t be worth the money.
Can I leave miter saw on stand?
The miter saw stand will not allow you to leave the saw on it, as it is meant for safety because if a piece gets loose, you don’t have it.
Can you use a miter saw on the ground?
You can use it on the ground if you want to, but be careful not to damage and cause damage to the saw. Also, make sure that your surface is smooth enough to accept a stand. Be sure to use a protective mat under the saw stand. If you are not sure, you can use a piece of plywood under the saw stand as well as on top of it.
How do you store saws in a garage?
If you are a carpenter and you have a room in your garage where you keep your tools, it is recommended that they be stored on the regular saw stands. Adding some sort of padding to the bottom of the stand will help prevent them from getting damaged. This would not only help you to maintain your tools better but also help you to get the most of them.
Are Mitre saw stands universal?
Yes, most of the miter saw stands are universal and are able to accommodate almost all models of miter saws. However, it is important to note that you should check the specifications of any stand you are planning to buy so that you can ensure that it will be compatible with your saw.
What does a miter saw stand do?
Miter saw stands are an excellent way of ensuring that you get the most out of your miter saws. Miter stands help improve safety, and they also ensure that you can cut straight and true lines on your boards and planks easily.
Can you work without a miter saw stand?
Yes, you can work without a miter saw stand as well. But, there are many advantages of using one of these stands. It would be difficult to work with miter saws without these stands.
What purpose does a miter saw stand serve?
They are used for protecting your saw from getting damaged as well as for improving your cutting accuracy and also for providing you with the best possible working environment.
Conclusion
So there you are- 6 of the best miter saw stands you can find in the market. All the six miter stands reviewed in this article are extremely versatile as you can use them with different types of miter saws. Additionally, setting up and dismantling the miter stand models is a breeze. Almost all the reviewed products come with multiple support arms for mounting different saws and lumbers.
And you’ll surely like the fact that all miter stand models (excepting two) are quite affordable